As a Licensed Vehicle Tester Phil Smith Automotive in Mildura are able to to issue Certificates of Roadworthiness and can also perform RACV Pre-purchase Inspections where required. Bring your car in to our well equipped workshop or Book a Roadworthy Inspection Online today.

A Licensed Vehicle Tester must check that your vehicle meets the standards set out under Regulation 220 by the Roads Corporation, or VicRoads, prior to a Certificate of Roadworthiness being issued. Occasionally a Certificate of Roadworthiness is also needed before you can have a defect notice removed from a vehicle or it may be required as part of a required inspection for vehicles such as taxis and buses (which must undergo regular, periodic mandatory Inspections).

A roadworthy inspection is not a pre-purchase inspection and does not take into account the overall condition or mechanical reliability of the vehicle. Where a pre purchase inspection giving comprehensive details of the general condition or value of the vehicle is desired, you should consider arranging for a separate independent pre-purchase inspection.

It is also important to note that a Certificate of Roadworthiness does not constitute a complete assessment of a vehicle's compliance with the Standards for Registration. These standards are generally governed by the Australian Design Rules (ADRs) and are often beyond the scope of a Roadworthy Inspection.The ADRs are a set of minimum standards for the construction of vehicles and trailers. A Roadworthy Inspection may not cover all of these standards as in most cases, compliance with them cannot be assessed by inspection alone.

Neither the workshop conducting the roadworthy inspection, nor the Licensed Vehicle Tester performing the actual examination of the vehicle are responsible for setting the standards a vehicle must meet to be issued a Certificate of Roadworthiness. These standards are clearly defined by VicRoads, the licensed vehicle tester merely confirms whether the vehicle meets the standards as specified.